Specifications
| 108-88-3 | |
| 8512 | |
| CC1=CC=CC=C1 | |
| 92.141 | |
| CHEBI:17578 | |
| Liquid | |
| 29mbar at 20°C | |
| 0.6 mPaS at 20°C | |
| Colorless | |
| 2.5L |
| C7H8 | |
| YXFVVABEGXRONW-UHFFFAOYSA-N | |
| toluene | |
| 1140 | |
| 92.14g/mol | |
| Amber glass bottle | |
| 3.1 | |
| 111°C | |
| -95°C |
Toluene, 99.8+%
For Residue Analysis, Distol™, Fisher Chemical
Chemical Identifiers
| CAS | 108-88-3 |
|---|---|
| Molecular Formula | C7H8 |
| Molecular Weight (g/mol) | 92.141 |
| MDL Number | 8512 |
| InChI Key | YXFVVABEGXRONW-UHFFFAOYSA-N |
| PubChem CID | 1140 |
| ChEBI | CHEBI:17578 |
Safety and Handling
Product Identifier
- Toluene
Signal Word
- Danger
Hazard Category
- Aspiration toxicity Category 1
- Flammable liquid Category 2
- Reproductive toxicity Category 2
- Skin corrosion/irritation Category 2
- Specific target organ toxicity after repeated exposure Category 2
- Specific target organ toxicity Category 3
Hazard Statement
- H304-May be fatal if swallowed and enters airways.
- H315-Causes skin irritation.
- H361d-Suspected of damaging the unborn child.
- H373-May cause damage to organs.
- H336-May cause drowsiness or dizziness.
- H225-Highly flammable liquid and vapour.
Precautionary Statement
- P210-Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P280-Wear protective gloves/protective clothing/eye protection/face protection.
- P301+P310-IF SWALLOWED: Immediately call a POISON CENTER/doctor /
- P303+P361+P353-IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower.
- P304+P340-IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P331-Do NOT induce vomiting.
Product Enquiry
Related products
-
Acetonitrile, 80%, 20% Water with 0.1% Formic Acid
Optima LC/MS, Fisher Chemical
- Reduced concentration of acetonitrile improves chromatographic performance, especially of early eluting, hydrophilic peptides.
- Pre-mixed for ease-of-use.
- Low metal ion content to ensure minimal metal contamination.
- Ultra filtered to ensure low levels of particulate contamination.
- Recommended solvent for use with Thermo Scientific EASY-nLC 1200 and Ultimate RSLCnano.
-
Tetrahydrofuran
Optima™, Fisher Chemical
- Screened for fluorescing and UV-absorbing contaminants to reduce interferences for smoother baselines
- Also meets ACS specifications
- Intended for research use only
-
Acetonitrile
for UHPLC Gradient Grade Analysis
- Efficiency: lot-to-lot consistency ensures reproducible results
- Low acidity/alkalinity levels avoid interactions with samples
- Peak shape: low baseline noise at 210nm and 254nm improves peak shape
- Speed: filtered to 0.1μm, allowing analysis to be performed faster at higher pressures with less risk of pump blockages
- Sensitivity: interference-free with outstandingly high UV transmission for improved resolution and sensitivity
-
DimethylFormamide
Extra Pure, SLR, Fisher Chemical
View Details